TN4S
nylon plug - the best universal nylon anchor in the world
![[your-subject]](https://www.adit.org.il/wp-content/uploads/2026/06/TN4S-2026-inv.jpg#9897)
Technical Specification
- Characteristics: nylon plug nylon anchor is a universal equivalent to all types of concrete and hollow blocks, full or hollow.
- materials: nylon plug: polyamid PA6 | Burg: Carbon Steel C1022/SS304 / SS316
- Technology: nylon anchor in the world’s four advanced directions.
- Standards: meets the requirements of the TAJ 1490 standard for drywall accelerations and meets the requirements of the TAJ 5103 standard for acoustic cartoons – suitable for a variety of applications.
Instruction Videos
installation guide to nylon plug TN4S
The total nylon plug range from Adit Ltd
AIS-C
nylon plug nylon in the fabric of termic isolation with European Technical Assessment
GL
nylon plug Universal nylon for general use of a variety of background walls
GX-L
nylon plug nylon with European Technical Assessment ETA to concrete and all types of background materials
What is nylon plug? Definition and explanation
anchor (or plastic anchor, also known as "finger") is a vital component in the construction and anchoring world. This is a small piece, usually made of nylon, polyamide, or polyprofile, which leads to a hole that is fevered in the wall, ceiling, or floor.
When the cracks are screwed into the nylon plug, the nylon plug is chatting (expansed) and pressed with a strong against the hole’s walls – creating a stable and reliable connection that holds the screw instead. The nylon plug allows many objects such as shelves, lamps, temperaments, wall furniture, fences, hand outposts, signage, sensory tools, and more – in any type of surface. The word "nylon plug" is derived from German (Dübel) and is used in Hebrew as the most common contours to describe plastic anchors to the wall.
nylon plug The ADIT’s TN4S – the leading global nylon plug in Israel
The nylon plugADIT TN4S He is nylon plug Universal Nealon from the INDEX, manufactured and marketed in Israel by ADIT – the leading company in Israel in the field of the professional anchoring. nylon plug TN4S was designed as one anchoring solution for all types of wall, and incorporates advanced Technology with proven reliability on the ground.
The Advantages technology of nylon plug TN4S
- The Falling to 4 directions - consists of four segments that spread simultaneously in all directions and ensure a uniform and groved grip across a wide area.
- universal (fit for everything) - Designed for concrete, full white, hollow white, concrete light (Itung), drywall, and stone. The perfect solution is that you don’t know what’s behind the wall.
- Suffering an amazing beauty. from the highest in the category. TN4S14 holds up to 628 kg in concrete!
- Made of polyamide 6 (top nihillon) - High flexibility, strength is an excellent mechanical, resistance for extreme and non-toxic temperatures.
- 8 Anti-Spin Regional Areas - Prevents what nylon plug rotates around itself as a guy during the screw.
- external cage The drill bit diameter and the required screw are embedded in the nylon plug body to prevent errors.
- A wide collar ( optional) - Prevents the decline of the nylon plug into the hole in the hollow walls or drywall.
The nylon plug Select Guide to any app
The correct nylon plug selection is critical to the success of the anchoring. Here's how to choose right:
Step 1: This is the background wall material.
| Type of Wall | characteristic | nylon plug is recommended in the series |
|---|---|---|
| concrete is full. | strength is high, precise hole. | TN4S06 – TN4S14 |
| White is full. | Medium, it may be dust. | TN4S06 – TN4S12 |
| The white woman. | Inner Space – Challenge | TN4S06 – TN4S14 |
| concrete is out. | Large inner space. | TN4S-L (Long version) |
| The drywall | Detailed and felt | TN4S05 - TN4S08/TN4S-A (with a collar) |
| The Stone/Tretin | Difficult, it might be tight. | TN4S06 – TN4S10 |
| concrete light (Itong/AAC) | Less density (soft) | TN4S (small to medium) |
Tip: If you don’t know what’s behind the wall, the universal nylon plug is the right choice for it.
Step 2: Set the required load.
- Easy load. (Photos, small mirrors, characters): TN4S05 – TN4S06
- medium load (pages, lamps, TVs): TN4S08 (TN4S10)
- heavy load. (TN4S12 - TN4S14)
Step 3: Select the Burg and the nylon plug
The nylon plug length is approximately equal to the thickness of the installed object + depth of the wall (minimum 30–50 mm within the wall). The diameter of the screw must fit in the excellent range and is marked on the nylon plug itself.
A Guide to Installation nylon plug Sea - Step by step
Tools are required: drill bit is not allowed to drywall or hollow block a sensitive hollow, drill bit in the corresponding diameter to nylon plug, a defector or vacuum cleaner for cleaning, a screw.
- Push the hole: The turtles were drilled before the surface according to the requested diameter and depth.
- Clean the hole: Use an air discharge or vacuum cleaner to remove dust. A clean hole allows the nylon plug to hold the concrete walls and not to slip on dust.
- The Brasha ( Optional): For concrete and soft materials, the covet of the hole in the tube brush helps very best contact.
- The nylon plug: Push the nylon plug to the fever (if it has a collar, until it is pressed on the wall). If it’s a little hard, gently tap it with a hammer.
- The screw: The screw has been merged through the object that it wants to hang into the nylon plug. While the burgh, the nylon plug will expand to 4 directions and lock in strength within the wall.
Why choose ADIT’s nylon plug Sea?
ADIT is the leading company in Israel in the professional anchoring field. It distributes INDEX products in Israel – a leading Spanish manufacturer with a presence in 60 countries. Choice in ADIT means a guaranteed quality that meets European standards (ETA), a full range of solutions, close engineering support, and most importantly, nylon plug seas that do not fail when it comes to your safety.
Common Questions about nylon plug Sea to anchoring (FAQ)
What’s the difference between the nylon plug plastic and nylon plug nylon?
Both are plastic anchors to the wall, but nylon (Polish) is a strong, durable and flexible premium material much more than poly Profilein which most of the cheap nylon plug seas are made. nylon plug nylon like TN4S is not broken in installation, does not dry or crack with time, and holds shear loads and a few times higher, and therefore is the standard in professional work.
Which screw is suitable for what nylon plug? (How do you choose a diameter?)
As a rule, a finger in nylon plug sea from Manylon, the diameter of the screw should be smaller in 1 to 2 mm from the nylon plug (and the hole that is fevered). For example, nylon plug in diameter 8 mm will match a 4.5-millimeter- thickness screw. In the nylon plug Professional Sea of Adit, the diameter of the required screw is already pre-corrected on the plastic body of the nylon plug itself, so it is not necessary to guess.
How to remove a plastic nylon plug / nylon from the wall?
The simplest and most common method: Take Burg and screw it up only half the way into the old nylon plug. Now, grab the head of the screw with a pallire or a slab, and beat the screw out – he will easily pull the nylon plug with it. If the nylon plug has been completely dry or refuses to go out, it can be pushed deeper into the wall using a screw and hammer, and to shut down the remaining hole with a yacht or a capsule.
What size is nylon plug to use a loophole or hollow block holes?
In a hollow pana, it is very recommended to use nylon plug with the hiccups to 4 directions (TN4S) which is also folded and held in the air within the hollow block. The medium-sized loaders used TN4S06 or TN4S08; for heavy loads used TN4S10 to TN4S14. The important rule in hollow block is hollow: Make sure that the nylon plug is long enough to pass the first hollow block and be judged inside the inner space.
How do you know which drill bit diameter to use the wall?
The drill bit diameter is always equal to the outer diameter of the nylon plug, and is clearly marked on the nylon plug itself. For example, TN4S08 is designed for a hole that is fevered with drill bit in diameter 8 mm. Never run too much hole “to easily get in,” because black too wide will cause nylon plug to weaken and significantly weaken its presidential capacity.
What do I do if I’ve pulled a hole too big and the nylon plug goes “on empty”?
This usually occurs in old buildings with a cool plaster or weak hollow blocks. The quick solution is to remove the nylon plug, move to the larger drill bit (e.g. from 8 to 10 mm), and use nylon plug and screw larger accordingly. In cases of severe disintegration (fected walls), it is recommended to move to a more professional anchoring by injection. chemical anchor Filling the entire space again, it is difficult for concrete, and surrounding the screwed rod.
Can you use the same nylon plug as drywall and concrete?
Yes! yes! This is the huge advantage of the nylon plug "Oenniberly" as the TN4S. His 4-direction mechanism allows him to hold on the strength in harsh and complete materials such as concrete, and at the same time to shrink and create a type of broad connection (Ferff) behind a thin drywall tablet. This saves contractors from buying different types of nylon plug seas for each type of wall.
What is the difference between the nylon plug and the nylon plug “Rosette” dedicated to drywall?
nylon plug Universal (TN4S) does an excellent work in a wide range of surfaces including drywall, and is excellent for image collection, shelves and lighting bodies in modern houses where the walls are involved. nylon plug "Roset" (or a metal-covered drywall) opens only to the walls of drywall, and it divides the load on a particularly wide area behind the panel, thus providing a higher and more specific weight in the case of an exception of weight hanging on the drywall wall only. If you’re already talking about drywall, it’s important to know that the best nylon plug for drywall is the BA-NY, which is a professional and accurate solution to these walls. You can find it here: BA-NY nylon plug American anchor stud for drywall and the walls of BA-NY.
How much weight load can such nylon plug hold concrete?
The data is very surprising: in the nylon plug-quality Manilon (such as the TN4S), the small nylon plug in diameter 8mm (TN4S08) is capable of holding a withdrawal weight of up to 170 kg in standard concrete (C20/25). nylon plug in diameter 14 mm (TN4S14) can carry a phenomenal weight of up to 628 kg!
What is nylon plug TN4S-A and TN4S-L?
These are special versions of the TN4S series: TN4S-A It comes with a particularly broad collar (Wide flange) at the top of the nylon plug, which prevents it from sinking deep into the hole in the walls with soft plaster or drywall. version of TN4S-L It is a particularly long version designed for concrete from a snoring or when it is required to switch to a very thick plaster/insulation layer before reaching a hard base where the nylon plug can be judged.
Is nylon plug a Manilon sea suitable for installation in the case?
For light items (such as light light lighting and smoke rods) – certainly yes. However, heavy weight loss in the ceiling (such as ceiling lights, swings, ladders or sports facilities that gravity works directly at the bottom), it is highly safely recommended to use light metal anchors (Jmbo) or chemical anchors, due to resistancem favoring the forces of the Preferential Fire.