TURBO JET Hammer-In Nylon Plug
A high-quality hammer-in nylon plug for fastening to concrete — made in Europe. The fast solution for light-duty, non-structural anchoring in large quantities.
Hammer-in installationEuropean-madePA6 polyamideSS316 stainless steelLight-duty anchoring
The Adit universal & nylon plug family
Choose the right plug for your base material, load and installation method.
TN4SUniversal · Screws in 4 directions GX-LUniversal · European ETA approval GLUniversal · For all base materials TURBO JETHammer-in nylon plug AIS-CThermal insulation · ETA approval
Hammer-in installation
TURBO JET is a hammer-in plug: insert it into the hole and drive it in with a hammer. No screwing, no special tools — the fast solution for light-duty anchoring in large quantities.
For anchoring that requires approved load values or a European approval — switch to GX-L. TURBO JET is intended for light, non-structural anchoring.
Technical specification
| Property | TURBO JET — hammer-in nylon plug |
|---|---|
| Properties | Hammer-in nylon plug |
| Materials | Plug: PA6 polyamide · Screw: C1022 steel / SS304 / SS316 |
| Technology | Hammer-in nylon anchor |
| Manufacturing | Europe |
Downloads
Frequently asked questions
Which universal plug should I choose?
Is a nylon plug suitable for drywall?
For light loads only. For mounting on drywall, use dedicated drywall anchors — BA-NY, IN-CO, TAPLA or CA-PA — which lock themselves behind the board.
What is the difference between screw-in and hammer-in?
With a screw-in plug, the screw expands the sleeve gradually and allows controlled tightening — giving higher load values. With a hammer-in plug, the pin is driven in with a hammer — much faster, but for light loads only.
What screws can be used with TURBO JET?
The plug is made of PA6 polyamide and accepts a range of screws to suit the environment: C1022 steel for standard indoor use, or SS304 / SS316 stainless steel where corrosion resistance is required.
Not sure which plug is right for you? Tell us about the base material and the load — we’ll recommend the correct plug and diameter.