What is self-drilling screw PS3 of Adit? Full explanation for a sandwich panel and anchors
self-drilling screw PS3 (Self-Drilling Screw for Sandwich Panels) is a dedicated co-author for the connection of isolated panels (Patch panel) to steel and aluminum profiles. The self-drilling screw and is involved in one continuous operation – without the need for a nibbling or drilling early – while creating a close, atom and a durable connection.
What distinguishes PS3 is The double-stage geometry of the Burge bodyThe screw is built from two areas of Burga in different diameters. In the beginning of the body (P1) the diameter is 6.3 mm (ST6.3) and the body later (P2) is small to the diameter.5.5 mmm (ST5.5). This unique structure gives the screw the capabilities of beautiful, broza and unusual seals.
When is the PS3 screw used? The screw is designed to connect sandwich panels directly to a metallic profile (steel or aluminum), with a thickness of up to 6 mm. The screw comes with the EPDM return to a complete seal, allowing quick and fast work.
The Advantages of screw PS3 - Not every screw for a sandwich is the same.
- A unique bipolar geometry: The diameter of 6.3 mm in the beginning (P1) and 5.5 mm later (P2) - a structure that increases the load of the fire and prevents the self-limitation of the screw over time.
- Technical data is happy: Values of fun and precision gem for each thickness of the steel and aluminum profile (allowed for sure and proprietary engineering planning).
- direct fastening technology for Chanel: The self-drilling screw and Brig in one action – without a pre-emptive nigger, without accessories and without “death time” on the ground.
- resistance is proven on the ground: steel C1035 is made in the cold glories (Atlantis C4) – not broken, unresolved, and not disappointing on difficult roof conditions.
- A dedicated EPDM: All the screw bars can be ordered with the EPDM to perfect seal; 195 and 230 mm s come with a return in the first place.
- Support and engineering responsibility: Adit engineers are available to help select the model, calculate load and conform to strict building regulations. ← citation-7976110.
PS3's bipolar geometry - which distinguishes the screw
The screw Body Building: Two Cotters, Two Brebra Areas
Unlike a normal self-drilling screw with one diameter throughout its entire body, the PS3 is built with two separate and complementary screws:
The drilling knife
7.5–9 mm
P1 - 6.3 mm
I have 1.8 mm.
P2 - 5.5 mm
I have 1.8 mm.
- P1 – diameter of 6.3 mm (head of the burglar - side of the knife): The first, largest, coded and passed through the steel/Aluminium profile. The big diameter creates a strong initial grip on the subject profile.
- P2 – diameter 5.5 mm (the screw body) The second, smaller screw, enters the sandwich panel. The difference between the two rows creates the “recorded” effect that draws the panel toward the presidential profile and strengthens the load of the supplement.
- The length of the drill knife: 7.5–9 mm = drilling up to 6 mm thick profile.
Why is it important? The biquatrial structure ensures that the panel is “intropped” between the two screws and cannot be released. The current loads are significantly higher than the screw with one diameter, and the connection remains stable even under wind and seismic loads.
Technical data is happy – link to steel Profile
The following data constitute the basis for safe structural planning with the PS3 screw. All values in tables are in KN to a single screw, the diameter of ST5.5 (Borg P2). Note: The values listed below are typical failure loads (Nrk/Vrk). For engineering planning, appropriate safety promotions should be applied. The planner must also make sure the profile itself suffers for a tear.
PS3 ST5.5 – Connecting to the steel Profile
| Load parameter (kN) | The thickness of steel 2 mm | The thickness of steel 3.5 mm | The thickness of steel 5 mm |
|---|
| Typical failure – fire. | 5.4 | 8.7 | 9.6 |
| Typical failure – a ring (Vrk) | 4.8 | 4.8 | 4.8 |
| Design load – tension (Nrd) | 2.5 | 4.0 | 4.8 |
| Design load – shear (Vrd) | 3.7 | 3.7 | 3.7 |
| Recommended load – tension (Nrec) | 1.8 | 2.9 | 3.4 |
| Service load - a ring (Vrec) | 2.6 | 2.6 | 2.6 |
PS3 ST5.5 - A link to a aluminum profile
| Load parameter (kN) | aluminum thickness 2 mm | aluminum thickness 4 mm | aluminum thickness 5 mm |
|---|
| Typical failure – fire. | 2.0 | 7.6 | 9.6 |
| Typical failure – a ring (Vrk) | 4.8 | 4.8 | 4.8 |
| Design load – tension (Nrd) | 0.9 | 3.5 | 4.8 |
| Design load – shear (Vrd) | 3.7 | 3.7 | 3.7 |
| Recommended load – tension (Nrec) | 0.7 | 2.5 | 3.4 |
| Service load - a ring (Vrec) | 2.6 | 2.6 | 2.6 |
Note: The infusion in the giraffe does not occur in the resolution of the profile (steel or aluminum). The plan must be checked to examine the profile’s suffering for the release of the final gem. Using the bars from steel to a aluminum connection can cause a global corrosion.
Geology and Measurement - screw PS3
Burgbourg PS3 Adit comes with uniform and accurate dimensions in all the series' titles:
| Parameter | Value/term | unit unit |
|---|
| screw (P2 - Body) | 5.5 | from the s (ST5.5) |
| Foreign diameter including the burglar (P1 - Head) | 6.3 | from the s (ST6.3) |
| Headline (dk) | 10.5 | mm |
| The Returning (C) | 5.46 | mm |
| Head thickness (K) | 4.1–4.5 | mm |
| The Box (e) | 8 | mm |
| P1 (6.3 mm) | 1.8 | mm |
| P2 (5.5mm) | 1.8 | mm |
| The length of the drilling knife | 7.5–9 | mm |
| Maximum steel thickness for drilling | Up to 6 | mm |
| The available lights | 60–230 | mm |
installation guide Fast – screw PS3 for Sandwich
- mark the point of penetration: A slight plaque with a precision marque will prevent the break of the screw knife at the beginning of the round, especially important in partial panel materials.
- Prepare the right screw: The speed of drilling in steel: 1,000–1,800 rpm. . . The drilling speed in the nigger: 600–1000 rpm. Maximum installation: 10.4 Nm. . . Amphect can be used - but it should be stopped immediately with the screw head attacher to the panel.
- The screw in the profile: Hold the screw in 90 degrees to the material and uniform pressure. The quarant rang up causes the breaking of the drill knife, a weak connection and a poor atom.
- Stop with the screw and the evasion: When the screw is suffocated and comes to the necessary tighter-stop. It is imperative to make sure that the ov (EPDM) is uniformly compressed but not completely hurdle – it is the key to a mountainous seal against rain.
Maccetts and Lights - screw PS3
| McT | The anchor type | length (m) | A small box (ones) | coating |
|---|
| PS55060 | PS3 5.5/6.3x60 | 60 | 500 | Cold galvanised |
| PS55082 | PS3 5.5/6.3x82 | 82 | 500 | Cold galvanised |
| PS55098 | PS3 5.5/6.3x98 | 98 | 500 | Cold galvanised |
| PS55115 | PS3 5.5/6.3x115 | 115 | 500 | Cold galvanised |
| PS55130 | PS3 5.5/6.3x130 | 130 | 250 | Cold galvanised |
| PS55150 | PS3 5.5/6.3x150 | 150 | 200 | Cold galvanised |
| PS55180 | PS3 5.5/6.3x180 | 180 | 200 | Cold galvanised |
| PS1955195 | PS3 5.5/6.3x195 | 195 | 200 | Atlantis C4 |
| PS1955230 | PS3 5.5/6.3x230 | 230 | 200 | Atlantis C4 |
Each screw can be obtained with a EPDM server depending on the request. The 195 and 230 mm UAVs come with the EPDM return in the first place.
All the barbarians for a sandwich panel in the Adit catalog
- PS3: self-drilling screw for a sandwich panel in the Goths, a bipolar geometry 6.3/5.5 mm, a quaint head with a java. The series is dedicated to connecting panels to strips and roof profiles.
- PSL: screw is particularly long for connecting a sandwich panel to the wells, with a long drilling point that allows drilling up to 12 mm thick profile. It is also available with the PSL+ARVUL.
- ABEI: self-drilling screw is a 304 SS. It is suitable for aggressive, foreign environments, coastline and chemical industry.
- BIE / BIE A4: Burga-metallali (Nirstru body, a knife from a hard steel). It is designed to drill fast and remain in Norse and steel is difficult (also available in A4/316SS).
- AUTO / BAUTO: self-drilling screw with a particularly long knife - allows drilling up to 12 mm thick steel. TheBAUTO It is the only version of the Rost.
- ABP / ABR: Bergs with aesthetic heads. ABP countersunk head Cognac for partial surfaces. ABR - A round and ridiculous head.
- RSZ / RS A2: self-drilling screw with a small lens head for delicate and frames.
Engineering consulting + screw PS3 quality = a complete solution for the Sandwich Panel Goths
The market is flooded with bars to a sandwich panel from overland sources that are often broken down, slowly screaming, evacuating fast – or worse, not providing a real seal. What distinguishes you. Adit Ltd Other suppliers are Engineering and Technical Documentation. . . The company engineers are available to help calculate and select the right screw length according to the panel thickness, establish the barbaric recoction according to wind and snow loads, and conform to building regulations. This saves failed costs on the ground and enables standard and happy concrete planning.
Common Questions and Answers (FAQ) - screw PS3 for Sandwich Panel
What is the uniqueness of PS3’s bipolar geometry and why is it important?
The PS3 screw is built with two different diameters: P1 in diameter 6.3 mm At the edge of the knife – is shook and passes through the subject profile – andP2 in diameter 5.5 mm In the body of the screw that is in the panel. The difference between the two rows creates an “active stabilization” effect: the panel is trapped and lasts between the two screws and cannot be released. The result – the load of the better than the screw in a single diameter, and the resistance is excellent under wind and tremors.
What is the difference between PS3 and PSL and when do you use each?
PS3 Designed for connecting a sandwich panel to(straps/purlins) - relatively thin profiles up to 6 mm thick, with a normal drilling knife (point No. 3). PSL Designed for connecting a panel to(Bams) - Absorient profiles are thicker to 12 mm, thanks to a long drilling knife (point 5) that enables deeper penetration. Both are in bipolar geometry 6.3/5.5 mm.
How do you choose the right PS3 screw length according to the panel thickness?
Calculating the length: the thickness of the Sandwich Panel + the thickness of the presidential profile + minimal overlap of the P1 in the profile (at least 10 mm). For example, a panel of 80 mm on a 3mm profile is required in the screw of at least 93 mm, i.e. choosing PS55098 (98 mm). The manufacturer’s technical database lists the thickness of the panel suitable for each MacT code.
What is EPDM and why is it critical in the PS3?
When PS3 fragments on the roof of a sandwich panel, the screw creates a hole in the metallic shell that can set rain and water into the layer of isolation. PS3 models with EPDM (which reaches default for 195 and 230 mm, and in order for all other lighters) contain an atom disc from EPDM - particularly resistant to UV rays, heat and cold. With the right estrangement, rubber is pressed and creates a rhythmic and perfect seal from the penetration of water around the hole.
Can PS3 connect a sandwich panel to a aluminum profile?
Yes, PS3 is happy to connect with aluminum, but there are two important things to know: first, the supplemental load in aluminum is lower than in steel (especially in thin thickness) - should be operated according to the latest aluminum load table. Second, self-drilling screws in the connection to aluminum in an exposed outdoor environment may cause a global corrosion. Consider using the screws from the grossta (ABEI(In particular, aggressive environments.
What is the difference between Nrd and Nrk (a typical failure load) and what to use the design?
Typical failure load (Nrk) is the prescribed in destructive laboratory tests – the screw or profile courses. Do not plan project by the failure load! Engineers divide the failure load in a suitable safety promotion (according to international standards) to reach the aligned load (Nrd) – which is the safe figure for planning. For conservative planning, we can use the recommended load. Adit provides all three data in technical tables.
Why is the screw knife broken or not broken?
In most cases this occurs due to: the junction at an angle (no 90 degrees per material), a rapid use of a screw up from 1,800 rpm or less than 1,000 rpm, an attempt to drill a thick profile from 6 mm with PS3 (documented to only 6 mm), or non-unitive pressure at the start of the drill. The thicker profiles should be moved toPSL With a long knife, or a series. AUTO.
What is PS3’s glycologic coating and what environments is appropriate?
Lighting up to 180 mm is in the coating. Cold galvanised195 and 230 mm lights come in the coating Atlantis C4 - Advanced and more resistant to difficult external conditions. Cold balloon is suitable for indoor environments and protected cares. For outdoor environments, a coastline, or when an ETA destination is required, consider the use of stainless steel holes.
Can you break up and re-engine the PS3 in the same hole?
The screw can be broken, but Really not recommended Return and use the same hole in the same hole. The double screw (6.3+ 5.5 mm) is swayed in the screw and a guy together, and the repetitive screw will significantly damage the suffering of the fire. In cases of re-disengagement, a new screw should be replaced and promoted if possible at a new point.
What is the recommended barbaric veins for PS3 screws in a roof panel?
The barbaric aroma depends on the wind and snow in the area, in the type of panel and the geometry of the roof. There is no single standard “review” – the planner must calculate the veins according to the relevant serviceloads and the screw load from the tables. Adit engineers are available to help this calculation. Please contact us at Tel Aviv: 1871-7976110.
![[your-subject]](https://www.adit.org.il/wp-content/uploads/2026/06/BIE-A4.png#9970)
