AIS-C - Adit Ltd

AIS-C

nylon plug nylon anchor in Tremous isolation with European Technical Assessment

Files to Download

Technical Specification

- Characteristics nylon plug nylon anchor in Tremous isolation with European Technical Assessment
- materials Polyprofile and polyamid PA6
- Technology nylon anchor in the Dupico
- Standards European Technical Assessment ETA 21/0823

Instruction Videos

Q1Z drywall AIS-C

The total nylon plug range from Adit Ltd

GX-L

nylon plug nylon anchor is a universal European Technical Assessment for concrete and hollow blocks

Click here to go to this anchor

BA-NY

nylon plug to the powerful and advanced drywall in the world

Click here to go to this anchor

GL

nylon plug Universal nylon for general use of a variety of background walls

Click here to go to this anchor

TN4S

nylon plug - the best universal nylon anchor in the world

Click here to go to this anchor

anchored in the insulation of AIS-C. It is the leading nylon plug in the Israeli market to anchoring external thermal isolation systems (ETICS) for building fronts. husband European Technical Assessment ETA-21/0823of the company of Adit Ltd. The anchoring professions of Israel since 2006.

nylon plug AIS-C is anchored in Tramic isolation Plastic type in the fabric: poly profile sleeve + penis polyamide PA6 from strength fiber GF30. Designed for anchoring insulation tablets (EPS, XPS, PUR, Rocks) to concrete, full brick, concrete, and easy concrete and concrete foamed. Happy service life: 25 years.

European Technical Assessment ETA-21/0823 - What does it mean to you?

The European Technical Assessment is the official approval engineering of the European Union for building products. nylon plug AIS-C has received ETA-21/0823. Instytut Techniki Budowlanej (ITB) The Technical Assessment Body of Poland – on 01/02/2022, Based on the EAD 330196-0104.

ETA-21/0823 The EAD 330196-0104 AVCP System 2+ Service life for 25 years CE Mark

What covers the standard?

Use A to E: concrete is a regular brick (B), brick/hollow blocks (C), concrete light (D), concrete is surrounded by AAC (E).
Typical objections to pull-out load (NRk): Up to 00 kN in full ceramic pancretion to 0.80 kN in concrete C16/20–C50/60.
The hard plate: 0.20 kN/mm (Cover 60 mm plate, the soft load 0.84 kN).
Minimum distance from the end and interval between the anchors: 100 mm in all directions.
The temperature of work: 0°C up to +40°C (range length up to +24°C).
Exposure to the sun without carpet: Not more than 6 weeks.

According to ETA, nylon plug AIS-C It is only intended for wind blows (spiritual suffocation) Not to the president of the dead weight of the system of isolation. The planning is carried out with safety records. γM = 2.0 andγF = 1.5.

Full technical description - anchored in the trans-aIS-C isolation

Ingredients of the product

The official (Expansion)

Made of poly Profilein (PP) material in the virgin material, in orange/white color. An external diameter of 60 mm (producer), a diameter of body 10 mm.

The Expansion Nail

Polyamide PA6 from strength fibers GF30 (subjective material), diameter of 5.7 mm. We will knock on the hammer and expand the sleeve of the drilling guy.

Another AISR ( optional)

The additional plate in diameter 140 mm from polyprofilin/PA6, to increase the holding area in soft isolation (the wool/ mineral and the Wall).

The equipment for a slump installation (Countersunk)

AISCS (Syrofor) or AISCW (Cultures) and AISPS/AISPW licking back after installation.

Measurement and radars - AIS-C

McT	description	length of L (m)	The thickness of the Max'tfix (MN)	Body diameter d1 (mm)	Head of D (M)
AISC10070	AIS-C 10×70	70	20	10	60
AISC10090	AIS-C 10×90	90	40	10	60
AISC10100	AIS-C 10×100	100	50	10	60
AISC10120	AIS-C 10×120	120	70	10	60
AISC10140	AIS-C 10×140	140	90	10	60
AISC10160	AIS-C 10×160	160	110	10	60
AISC10180	AIS-C 10×180	180	130	10	60
AISC10200	AIS-C 10×200	200	150	10	60
AISC10220	AIS-C 10×220	220	170	10	60
AISC10260	AIS-C 10×260	260	210	10	60
AISC10300	AIS-C 10×300	300	250	10	60
AISC10350	AIS-C 10×350	350	300	10	60
AISC10400	AIS-C 10×400	400	350	10	60
Deep drilling: 60 mm \| effective anchoring depth isf: 50 mm \| The diameter of drilling: 10 mm

Calculating maximum insulation thickness:
Installation on the surface: hD = La − ttol − hef
Abandoned installation: hD = La − ttol − hef + hR
(When ttol = thickness of the filos layer, hR = the thickness of the deposit)

Typical load – AIS-C according to ETA

0.80 kN

NRk concrete C16–C50
(Selve anchor)

0.41 kN

The Nrd.
concrete C20+

0.29 kN

The Nrec service load
concrete C20+

Base material	Category category	NRk [kN]	The Nrd [kN]	Nrec Service (kN)	The drilling method
concrete C12/15	A	0.55	0.28	0.20	The hammer
concrete C16/20 to C50/60	A	0.80	0.41	0.29	The hammer
Full of MZ pottery	B	1.00	0.51	0.36	The hammer
The Sillic KS	B	0.40	0.20	0.14	The hammer
White for the Porotherm 25 P+D	C	0.10	0.05	0.04	Round round.
hollow block KSL	C	0.65	0.33	0.23	Round round.
concrete is easy LAC	D	0.20	0.10	0.07	Round round.
Promotes safety of ⁇ M = 2.0 \| ⁇ F = 1.5 \| Note: hollow blocks C – Requires a(min) ⁇ 11 mm (Porotherm) or 25 mm (KSL)

Note to Israel: The hollow blocks mentioned in the European Technical Assessment (Porotherm, KSL, LAC) may differ slightly from the country’s hollow blocks. It is recommended to carry out pull-out test on the ground (pull-out test) before planning on Israeli hollow blocks. Adit helps in coordinating the tests.

installation guide - anchored in the AIS-C

Installation of anchored in Tramic isolation AIS-C is simple and fast and does not require special tools. The following steps must be taken in order:

The installation on the surface (Surface Assembly)

Drilling - drill a vertical hole in diameter 10 mm and depth 60 mm into the base material (with no hammer condition).

Cleaning cleaning - In full-base material, the fever must be cleaned in air pressure and brushing.

The nylon plug Put the nylon plug through the layer of isolation until its success is flat on the face of isolation.

The penis suffocation - Spoke the polymalide penis in the hammer until it is completely immersed in the sleeve.

The snails (Countersunk Assembly)

Put the hole in the base.
Use AISCS (Sterofor) or AISCW (Milit and Wall) to create a outlet in the isolation layer.
Put the nylon plug and make sure the plate is flat.
Spoke the penis.
Put the AISPS/AISPW back into the safe and secure banks.

Professional tip from Adit: In hollow blocks loops should be only working in a round and reducing the speed of drilling as they approach the internal code. Do not use the “ hammer” mode in the brick loopholes – this may break the web (internal partition) and hit the anchor.

Advantages nylon plug AIS-C anchored in transmemite isolation

⁇ European Technical Assessment is full

ETA-21/0823 - The most rigorous engineering proof. The ETA can be used by EAD 330196-0104 according to all requirements.

Head of a large plate 60 mm

High hard space (0.84 kN load will make a plate.) You can expand to 140 mm with the AISR plate for soft isolation.

Quick installation in the fabric

Without screws and developers, Finn is only inserted in a hammer. Significant time savings and work costs at large projects.

⁇ resistance is high

Happy service life for 25 years. Polyamide PA6+ GF30 is resistant to 40°C work temperatures up to +80°C throughout the building’s life.

⁇ for all base materials

Happy to concrete, full white, hollow white, hollow block Silite, easy concrete. One solution to all fronts of the building.

All types of isolation

Fit to EPS, XPS, PUR, mineral andwell, glass wool, cell panel and more – all the common ETICSs in the country.

AIS-C vs AIS-S - What is the difference?

AIS system comes in two major variants to ETICS:

characteristic	AIS-C (Faline)	AIS-S (Psalm steel)
The material of penis	Polyamide PA6 GF30	carbon steel + zinc coating ⁇ 5μm
The thermal bridge	Minimum (frequent)	higher (metallic)
NRk concrete C16+	0.80 kN	0.55 kN
NRk in the MZ pottery pan	1.00 kN	0.65 kN
approval to concrete is surrounded by AAC	Not (only AISS)	(Yes, 0.10 kN)
The relative price	lower.	higher slightly
It is suitable for Israeli project.	Most cases	When required by AAC

The Adit recommendation: Most projects in Israel (concrete, White) is the optimal choice for performance and cost-effectiveness. projects with concrete is flooded (AAC/Tong) – AIS-S must be transferred to AIS-S.

An anchor for terami isolation in Israel – what is important to know?

The Israel’s thermal isolation market has grown significantly in the past decade, with new demands to repair 1045 for thermal isolation of a building’s shell. The Knesset anchored in Tramic isolation ETA gradually replaces the “geneary” solutions that were previously common.

The division of nylon plug seas by height: According to Israeli and European regulations, the nylon plug sea number to M2 has increased as a structure is higher due to the growing wind loads.
The Climate Area: In the Galilee, levels and cold areas require thicker isolation – AIS-C must be selected in appropriate lengths (up to 400 mm).
pull-out test: Non-expected base materials in ETA (such as hollow blocks) must be carried out in pull-out test on the ground according to EOTA TR 051.
Controlled: The installation must be carried out by a competent human force and in the supervision of a responsible engineer.
Service life for 25 years: Compliance to the average Israeli structure life and the requirements of the resistance Construction Products.

Common Questions - anchored in translustic isolation, nylon plug and anchor stud for isolation

What is anchored in termic isolation?

anchored in termic isolation (also known as tertiary isolation)nylon plug in Insolvation, anchor stud in Insolvation, The anchor ETICS or Open to isolation(He is a special plastic phosphor whose job is to connect thermal insulation (Sterofor, mineral andwell, XPS etc) to the walls of the building – concrete, White or hollow block. It is built from a plastic sleeve (nylon plug) with a wide-head plate to prevent a sunset into isolation and penis that is produced to lock the sleeve inside the drill. In Israel, it is very common in the projects of the front clarifies (ETICS/ External Terming).

What is the difference between nylon plug and isolation and an anchor for isolation?

This is actually the same product. nylon plug in Insolvation It is the more common professional terminology among contractors and performers; anchored in isolation It is the more common technical-engineerment among engineers and designers. Sometimes, they also use terms. Pystan for Insolation, The nail to isolation or Open to isolation. . . Everyone refers to the same group of products that include plastic sleeves with a plate (plastic or metal).

How many nylon plug seas are required for the square?

The nylon plug number is dependent on the height of the building, the climate zone, wind loads and the thickness of isolation. As a general term, European Technical Assessment EAD:

1–4 (up to 12 m): 4–6 nylon plug Sea/R.
5-10 (up to 30 m): 6–8 nylon plug Sea/R.
10 or older floors and end areas: 8-12 nylon plug Sea/R.

Adit provides accurate amounts of calculation according to the project data for free. Call the company’s engineers to an exact return.

Is it required to European Technical Assessment ETA to nylon plug insulation in Israel?

Today today today today Not mandatory. According to Israeli regulations, however, the demand for supervisive engineers and authorities to use nylon plug will be isolated with ETA – both in public projects and in large private projects. ETA is Your visa card for thought and proven planningIt provides all the stress values, the withdrawal from the end and the profit to the explicit calculation, allowing the requirements of international quality visitors. Adit strongly recommends that ETA be required in all project ETICS.

What is the difference between AIS-C and AIS-S?

Both nylon plug will be isolated from AIS with ETA-21/0823. The main difference is in penis:

• AIS-C - Finn polyamide PA6+GF30 (F30). Advantage: Minimum thermal bridge, NRk is higher in concrete and brick, lower price. Limitations: Not happy with the AAC.
• AIS-S - Finn steel is from Gualuon. Advantage: Happy to the concrete (AAC). Limitations: The higher thermal bridge, NRk is slightly lower in concrete.

Most of the Israeli projects AIS-C is the right choice.

What is AIS-DC and AIS-DS? What is the difference from AIS-C?

AIS-DC and AIS-DS are AIS-C and AIS-S respectively:

• AIS-C / AIS-S: The anchoring depth is effective and isf = 50 mm. It is suitable for concrete and full understanding.
• AIS-DC / AIS-DS: The anchoring depth is effective and isf = 80 mm. Designed for lighter base materials (hollow blocks pioneers, concrete is easy, concrete is flooded) where anchoring is required deeper to achieve a satisfactory NRk.

AIS-DC also comes with PA6+GF30 and stands at NRk to 0.45 kN in concrete C16+.

How do you calculate the length of nylon plug the necessary isolation?

The length of the nylon plug is calculated according to:

L = hD + ttol + hef

When:
HD = thickness of the layer of isolation (for example 100 mm)
ttol = thickness of the attache/filos layer (usually 0–20 mm)
Hef = depth anchoring required by the base material (50 mm per regular AIS-C, 80 mm per AIS-DC)

Examples of 100 mm isolation + Figus 5 mm+concrete isf 50 mm L = 155 mm / Select AIS-C 10×160.

Can you use nylon plug for solitude in the home / cracked concrete?

nylon plug is aIS (ETICS anchors) only designed for anchoring front-intulation systems for ETSIS (ETISIS)Only wind.. . . They are Not not not Designed for anchoring constituencies steel, shelves, tracks, foreign furniture and the U.S.. These Applications have turned to anchor stud Sea Division of Adit (MTP-X, MTH, chemical anchors). Also, ETA-21/0823 It does not include approval to cracked concrete. The nylon plug is designed for the wrong concrete.

How long can the nylon plug be exposed to the sun before a safety cover?

According to ETA-21/0823, Not more than 6 weeks.. . . Long exposure to UV radiation can damage the penis’s polyimmalide and lower the anchoring performance. Keep your schedules and complete the carpet coverage in time.

What is the thickness of the drilling required for nylon plug AIS-C?

The drilling line: 10 mm (The maximum cutting of drill bit: 10.45 mm). Deep drilling: at least 60 mm into the base material (not including the thickness of isolation). AIS-DC: Minimal drill depth 90 mm. The stabbing system should be drilled into the wall according to the appropriate drilling method for the base material ( hammer to concrete/full understanding; rotation to the ovaries).

Is nylon plug AIS-C suitable for General Wall?

Yes. yes. Insulation from General Wall (semi-rigid) is recommended to add The AISR plate in diameter 140 mm To disperse the attachment on a larger area and prevent the standard success into the softer material. You can request from Adit AISR plates in addition to nylon plug.

Can you install a kilo of μg in winter/in the rain?

According to ETA-21/0823, temperatures can be installed. 0°C for +40°C. . . In the rain conditions, make sure that the base material is not too wet and there is no ice in the drill. The contagion of isolation to the wall (some ETICS system) is subject to the requirements of the satanium manufacturer - should be operated according to the manufacturer's instructions.

What is ETICS and why does nylon plug need to be isolated?

ETICS = External Thermal Insulation Composite System = an integrated external thermal isolation system. This is a front-line method in which the Insulation tablets (EPS/Militol and Wall) are glued to the wall and protected in an external rock layer. Thenylon plug in Insolvation (Enter ETICS) is the mechanical component that connects the isolation panels to the wall – as a back to glue and standing in wind loads. Without nylon plug, the sea may be strong, the layer of isolation will be disconnected from the wall.

What is the difference between installation on the surface and the installation of the grove (countersunk)?

Installation on the surface (Surface): The nylon plug head sits on the outside isolation. The plate is then covered in the first layer of plaster. It is simpler, no more tools are required.

The installation is merged (Countersunk): Create a sink inside isolation, inserting the nylon plug so that the plate is 5–25 mm in isolation and instilled in isolation. Advantage: Reduces a thermal bridge, a better aesthetic, performance at ETA: itf is enlarged in HR. The disadvantage: Requires additional equipment (click + jack) and a longer installation time.

What is the safety of ⁇ M = 2.0 and why is it important?

In the design of cakes according to ETA, NRk (Characteristic Resistance) is the characteristic load set in experiments. The engineer must divide it into theThe safety of material ⁇ M = 2.0 For the NRd:

NRd = NRk / γM = NRk / 2.0

After that, the service load on a single anchor will not exceed NRd/ ⁇ F (when ⁇ F = 1.5 = promotes load). Hence, the maximum service load is:
Nrec = NRk / (γM × γF) = NRk / 3.0

For example, AIS-C in concrete C20+: Nrec = 0.80/ 3.0 = 0. 0.27 kN ⁇ 27 kg per single anchor.

What is AISR and when does it need?

AISR is another plastic plate in diameter 140 mm (as opposed to 60 mm of the built-in success) made of PP/PA6 and is used with nylon plug Ya AIS-C and AIS-S. It connects to the nylon plug plate and increases the holding area.

Especially needed in:
Insulation from General Wall, which may be digested under the small success
-Solating XPS/A low density EPS
When you return hard success requires greater space

Where to buy nylon plug will be the AIS-C in Israel?

The company of Adit Ltd It is the official representative of INDEX products in Israel, including nylon plug Ya AIS-C for transmilience. You can order:

• Directed from Adit: 054-7976110 | www.adit.org.il
The product is available in all sizes (70 mm to 400 mm) inventory is ready for fast supply.
Adit provides free technical advice to select the right nylon plug to project