A butterfly jumps to drywall
CA-PA
The metal jumper for drywall
Files to Download
Technical Specification
- Characteristics: Wedge anchor for cracked and unCracked concrete
installation guide
-
- The hole.
- Put the anchor stud in a folded way with the pointed edge.
- Turn the rod and make sure the anchoring tablet is straightened.
- Destroy the Abiser by the Burgic Hand
nylon plug to drywall from Adit Ltd
TAPLA
The world's strongest and most advanced drywall anchor for heavy loads
![[your-subject]](https://www.adit.org.il/wp-content/uploads/2026/06/TN4S-2026-1.jpg#9896)
TN4S
The world's strongest and most advanced drywall anchor for heavy loads
IN-CO
nylon plug Universal nylon for general use of a variety of background walls
BA-NY
The world's strongest and most advanced drywall anchor for heavy loads
What is a metal-copy butterfly for drywall?
The metal jumper for drywall He is a professional garden consisting of a metallic head ( wings) automatically opened with an internal spring immediately after he penetrates the drywall tablet. The open mind leans on the back of the panel and disperses the load on a large area, allowing a much safer hanging than a normal plastic nylon plug.
Unlike the concrete or White Wall, the drywall Wall and the drywall panels with an air space between them – therefore a unique Technology is required that you can hold loads safely and stable, without checking the tablet.
Choosing the correct nylon plug is critical for safety: the unsuitable nylon plug may cause a fall of a shelf, a lighting body, a air conditioning or any other component – and endanger the integrity of the wall and safety of the residents.
nylon plug types drywall - A comprehensive comparison
The market has several types. nylon plug is drywallEach with its own Advantages and disadvantages:
1. 1. nylon plug Universal nylon Expands such as ADIT TN4S
This is just the most common nylon plug in stores. Jorge-burning codes, bring the nylon plug, and from the screw-heads that make the plastic expand behind the board.
- Advantages: Cheap and accessible, easy to install, suitable for very light loaders.
- Disadvantages: A very low suffering – usually up to 5-8 kg. The plastic tends to crack the drywall tablet in the load. It is not suitable for hanging from the ceiling. A limited range of sizes.
- Load capacity: Very low (2–8 kg according to the type of tablet)
2. nylon plug screw in the Cracos (Anazon) such as ADIT TAPLA
nylon plug with a rugged buffer that enables direct penetration to drywall without early drilling. The nylon plug is based in the thickness of the board only.
- Advantages: There is no need for early drilling, quick to install, available in stores.
- Disadvantages: You will suffer from medium to 20 pounds. Bisssus is only the thickness of the board and not beyond the space – therefore relatively weak. It is not suitable for use in drywall (9.5 mm).
- Load capacity: Medium (10–20 kg depending on the thickness of the tablet)
3. nylon plug Ordinary Butterfly (plastic) such as ADIT IN-CO
Selecting a folded nylon plug that is inserted into the wall and is being sailed behind the tablet. The mechanism creates a click on the inside of the panel, but is made mainly of plastic rather than metal.
- Advantages: You will suffer relatively high, suitable for the ceilings and walls.
- Disadvantages: If the screw is over, the nylon plug falls into the wall. It is relatively difficult to install. The screw must be installed along with the nylon plug. A large hole that remains open if you remove the screw.
- Load capacity: High (20–50 kg), but depends heavily on the installation technique.
4. The metal-copy butterfly for drywall - CA-PA
The classic and recognized "head of a butterfly" technology: two metal wings are connected with a spring, which automatically opens to 180 degrees as soon as they pass the drywall tablet. The metal wing is leaning on a wide area behind the panel, allowing a standard screw connection (M4 to M8) directly into the head.
- Advantages: Full metal head (non-plastic) – resistance and significant high-performance, a wide range of sizes from M4 to M8, suitable for walls and ceilings drywall, also suitable for a single drywall and a double drywall and a hollow hollow block, allows relatively high loads for accessible price.
- Disadvantages: Like most of the classic nylon plug, if the screw is completely removed, the butterfly falls into the space behind the wall and cannot be pulled back.
- Load capacity: High – up to 69 kg, which is better than double 12.5×2 mm (bourgeois M8)
A comparison table – nylon plug will drywall by suffering
| Type of nylon plug | Suffering (C) | The drilling is required. | suitable for case | The metal head. |
|---|---|---|---|---|
| Plastic is expanding | 2–8 | Yes | No | No |
| Bored self (stard) | 10–20 | No | No | No |
| Plastic Butterfly / Arkhov | 20–50 | Yes | Yes | No |
| ADIT CA-PA - Metal-Friving | Up to 69 | Yes | Yes | Yes |
Why is ADIT CA-PA the recommended solution for the drywall metal-floor?
The metal jumper for drywall Adit CA-PA Adit is the most classic and reliable metal butterfly head in the category, and is manufactured in the world-leading Spanish INDEX device in the anchoring field. Here are the main reasons to choose:
- Full metal head and no plastic: The steel is a zinc plated ⁇ 5μm, so it is resistant to the load and for a long time more than nylon plug will be a cheap plastic butterfly.
- A variety of sizes full: Available in four dimensions (CAPA004 (M4), CAPA005 (M5), CAPA006 (M6) and CAPA008 (M8) – so there is an accurate solution for all load and all screw diameter.
- All the thickness of the drywall tablet: A relatively small drilling requirement (12–22 mm only, depending on size) and a minimum space depth of 26–54 mm – also fits limited spaces behind the board.
- Flexibility of use: The CA-PA head is the building stone of the PA family of Adit – it can be combined with a straight screw, with and (PA-GA) or with a prominent screw (PA-ES), depending on the need.
- International standards: Manufactured by INDEX - from the world's leading manufacturers to anchoring, from steel SAE 101010 in zinc coating stands at ISO 4042.
Technical installation data – the butterfly of the CA-PA metal slides
The following table presents the full technical dimensions and requirements of the CA-PA head in accordance with the size of the screw:
| Product code | The screw (M) | General length (m) | Closed Head height (M) | The drilling (m) | Minimum space depth (m) |
|---|---|---|---|---|---|
| CAPA004 | M4 | 39 | 10 | 12 | 26 |
| CAPA005 | M5 | 50 | 12 | 15 | 33 |
| CAPA006 | M6 | 55 | 14 | 18 | 37 |
| CAPA008 | M8 | 76 | 16 | 22 | 54 |
The appropriate screw (Threaded rod 975ZM) is not included in nylon plug and is sold separately.
The sufferload of the CA-PA metal slide butterfly – Technical data
The following table shows the maximum maximum load recommended for each size of the screw, according to the thickness of the drywall (the data is suitable for a single anchoring point, without the effect of intervals and distance from the end):
| Size of screw | 9.5 mm | 12.5 mm | 12.5×2 mm | 15 mm | 15×2 mm | concrete cells |
|---|---|---|---|---|---|---|
| M4 | 18.9 | 23.7 | 20.4 | 23.7 | 29.9 | 10.0 |
| M5 | 19.7 | 24.4 | 26.2 | 36.1 | 28.0 | 12.0 |
| M6 | 21.9 | 25.5 | 36.4 | 36.4 | 40.1 | 13.0 |
| M8 | 23.3 | 30.2 | 49.2 | 44.8 | 68.8 | 14.0 |
* All values in KGB, pull-out load are recommended according to INDEX standard. The data is valid for all products based on the CA-PA (including PA-GA and PA-ES).
Simple installation in 4 stages (proper of the CA-PA metal slides)
- The drywall cluster is distributed in the diameter suitable for the size of the screw (12–22 mm depending on the table).
- They fold both metal wings along with the spring, and set the head through the hole until it passes the board into the inner space.
- The head is “divided” and automatically opened with the help of the spring and leans on the back face of the tablet.
- The screw (non-include) is broken through the implanted item, through the hole in the board, until it is caught in the internal screw of the CA-PA head and is well held in front of the board.
Why choose Adit Ltd?
There are many products called in the market. "nylon plug drywall" or "Freper-Fake"But not everyone is at the same level of quality, safety and suffering. When it comes to safety of a product hanging in a ceiling or in a wall – such as a lamp, a lamp, a shelf, a air conditioning, a screen or heavy equipment – there is no place for compromises.
| Adit Ltd - Experience, professionalism and quality without compromise |
|---|
| A long time experience in the Israeli market in the field of construction and defense solutions. |
| imported products from world-leading manufacturers (INDEX) – check and happy. |
| Professional and engineering advice for all project - from the initial phase to execution. |
| Full technical accompaniment: Calculating loads, choosing a suitable solution, installation guidance. |
| A wide range of cloudy products for all types of walls and ceilings under one roof. |
Common Questions About a Metal Persecution to drywall (FAQ)
What is the difference between a metal-floor and a regular drywall?
The metal jump. It was designed specifically for penetration and anchoring within thin drywall panels behind which there is air space. Its strong draw is happening behind the panel and not inside full material, making it more powerful than the standard-wide plastic nylon plug. nylon plug Ordinary Wall (for example, concrete or White) requires a solid wall inside which the plastic can expand and pressure – it simply won’t hold the hollow drywall. Using nylon plug is not suitable for the drywall wall will cause dangerous fall and hole in the wall.
How much can a metal-floor butterfly be carried by drywall?
The answer depends on the size of the screw and the thickness of the board. by nylon plug ADIT CA-PAA single drywall burger carries about 19-24 kg, and the M8 screw in a double panel (15×2 mm) can hold up to 69 kg of fun. For comparison, the expanding plastic nylon plug will simply carry only 2–8 kg, and nylon plug “Ablem” (bourgeois self) can hold about 10 to 20 kg. The metal-floor butterfly is among the best in the butterfly category.
How does a metal-floor work for drywall?
The metal head is built of two wings connected with a central axis with a spring. When installation folds the wings together and swigs them into the hole in the drywall calendar. Once the head passes the panel into the inner space, the spring opens the wings automatically to a horizontal location, and they lean on a large area from the back of the panel. This is how the load is distributed and prevents the drywall’s tear around the hole.
How do you install a metal-producer in the stages?
The quaint snoring codes that are suitable for the size of the screw (for example 18 mm per screw M6), fold the two metal heads together, and penetrate it into the hole until it enters the space behind the board. The head automatically opens with the help of the inner spring and is on the unusual board. Now the screw is out of the outside, through the implanted item, until it is caught in the screw of the head and put it back to the board. The whole process is two minutes long.
Is a foam butterfly also suitable for hanging from the ceiling (for example a lamp or a lamp)?
Yes, but not all kinds! nylon plug is too simple or nylon plug. Not suitable The drywall ceiling due to the strong gravity operating downward (forces of constant fire). A metal-floor butterfly such as ADIT CA-PA, on the other hand, rests with the metal head on the back of the panel and displays high and controlled values depending on the thickness of the tablet – which also fits it well to ceiling loaders when choosing the right screw size.
What is the size of the drill required to emit metal slides to drywall?
The size of the drilling in nylon plug ADIT CA-PA Depending on the size of the screw: 12 mm for M4, 15 mm for M5, 18 mm for M6, and 22 mm for M8. It is always important to check the manufacturer’s specifications on the packaging before drilling, since nylon plug other seas may require different diameters.
Can a metal-floor be removed after installation?
It depends on the type of nylon plug. In nylon plug, a normal snail – it is possible to simply scare it out, but there will be an ugly hole. In a classic metal slide like CA-PA If you remove the screw completely, the metal head will fall into the space behind the wall and it cannot be pulled back (stay stuck in the board). It is recommended if the need to hold the screw from a partial screw and not pull it up to the end, or plan the installation location in advance.
What is the difference between M4, M5, M6 and M8 in a metal-floor?
In CA-PA (as much as nylon plug will be a professional butterfly), the measure marks the metric screw wire required for work with the nylon plug: M4 per screw with a thickness of 4 mm, M5 to 5 mm thickness, M6 to 6 mm thick and M8 to 8 mm thickness. The larger the screw is, the more the length of the head, the amount of drill required and the necessary loading and possible gems. The choice depends on the planned load and the hole in the item that wants to hang.
Can I use a metal-floor to hollow block hollow (intong/fus) or concrete cells?
Yes! yes! The head of the metal-copy butterfly is also suitable for the hollow blocks loops and concrete light cells, not just drywall. In the CA-PA version, the recommended completion value in concrete cells ranges from 10 to 14 kg, depending on the size of the screw. The head is decorated, open with the help of the spring and leans on one of the inner hollow block partitions, creating a stable grip.
What is minimal thickness for the drywall panel to use the CA-PA metal-frequency butterfly?
The CA-PA is suitable for a wide range of tablet carriers: from 9.5 mm to a double panel of 15×2 mm. The minimum space depth required behind the panel so that the metal head can fully open ranges from 26 mm (Lborg M4) to 54 mm (Lborg M8), depending on the size of the selected nylon plug.
Which drywall is the strongest – a metal-floor crystal toggle?
In the category of nylon plug will be the classic butterfly, a metal-copy butterfly as CA-PA Presents a very high rap (up to 69 kg that is preferable to a double panel) and is clearly preferred over a normal plastic butterfly and nylon plug. However, those who seek the highest resilience in the market and full reuse (even after the screw), also have solutions of the type of gateway toggle with a particularly broad-based profile. In both cases, the right choice depends on the planned load, the thickness of the board and the reuse requirement – and therefore it is recommended to consult the Adit team to select the appropriate solution.
How much nylon plug will a sizzling butterfly need a drywall ceiling?
The number of nylon plug seas depends on the total load, size of the selected screw and the thickness of the board. A rule of thumb: divide the total load that is desirable about the recommended add-on to a single nylon plug (according to the table on this page) and circuits always upward, usually with a security booster. It is important to disperse the nylon plug seas in the right intervals and not too close to the board. Serious contractions from the ceiling are very recommended to contact the Adit engineer for an accurate calculation and professional advice at no cost.
Instruction videos is anchored in the CA-PA
installation guide anchor CA-BA (very similar to CA-PA)