CH Sleeve Anchor
Sleeve anchor with the European ETA approval – in a wide range of heads and finishes.
What is a Sleeve Anchor?
A sleeve anchor is a through-fixing anchor with an expanding metal sleeve. You drill through the fixture, insert the anchor and tighten – the sleeve expands along its full length and locks the anchor against the wall of the hole.
The advantage: the expansion is spread over a large area, so a sleeve anchor also suits solid masonry (brick, solid block) and not only concrete – unlike a wedge anchor.
Twelve Versions in the Series
Technical Specification
| Characteristics | Sleeve anchor with European approval |
| Technology | Expanding metal sleeve |
| Versions | 12 – different heads and finishes, including A2 stainless |
| Base materials | Concrete and solid masonry |
| Approvals | European ETA |
Files to Download
Frequently Asked Questions
How does a sleeve anchor differ from a wedge anchor?
A wedge anchor (MTP-X) expands only at its tip – a large force concentrated at one point, excellent in concrete. A sleeve anchor (CH) expands along the whole sleeve – the force is spread, so it also suits solid masonry, where a wedge anchor could split the material.
Which version should I choose?
The series has 12 versions – different heads (eye, hook, bolt, nut) and different finishes (galvanized, A2 stainless). Our engineering team will match the version to the application.
Instruction Videos
The Java ADIT CH: nylon plug Professional for heavy loads with the highest inlerable in the world
In the construction, infrastructure and renovations, the anchoring solutions are safe and are the basis for stability and safety of each structure. When talking about anchoring is heavy in concrete, the most widely described term in the Israeli professionals is the case. anchored by Jabmbo (or) nylon plug, mbo(c) But not all the sleeves were born equal. If you are looking for the worldtop – an anchor with a phenomenal, proven reliability and approval tough international seas – The Javad Java ADIT CH It is your undisputed choice, and perhaps the best sleeve anchor in the world today.
The CH-Made anchor from the Adida home offers the highest failure and work in the category, providing a perfect response to constructive applications in non-Cracked concrete, while meeting the most stringent European standards (ETA).
What is the nylon plug Sleeve anchor anchor and why does the CH change the rules of the game?
The term nylon plug, mbo or anchored by Jabmbo It refers to mechanical anchor, which operates in the method of controlled expansion from the Mind (Torque-controlled Iraqi anchor). When the screw or the UN is tightened, an internal humming goes into the metal sleeve, extends it and severs it with great power to the arrowing pedals in concrete. The great friction that is created is that it holds the load.
In a committee that simple products in the market present low-flying and sensitivity to the failures, the Grambo ADIT CH anchor was designed for the highest level of engineering. His sleeve is equipped with a unique “Built-in antispins” system, which prevents the nylon plug from rotating on the front during the installation. This engineering ensures smooth, fast and safe installation in 100% of the cases.
Advantages, which makes the CH anchor the world’s best gambuoy.
- You will suffer extreme load: The CH model offers recommended load values and exceptional content. For example, an anchor in the M20 diameter comes to a typical gem of up to 72.3 kN and suffers an unusual beauty, which puts it at the top of the global performance table.
- Happy life span for 50 years: The anchor was tested and approved by the EU standards for continuous and secure work of at least 50 years (King Life Time Approved).
- approval resistance: Tested and officially approved for resistance to extreme wind loads (Wind Loads Approved), a perfect solution for cutting out foreign constituencies, signs and intrigues.
- Direct installation through the element: Allows drilling and installing directly through the hole of the fixed profile or miscarriage, without the need for an early label and the moving element.
- A variety of materials and coatings: Available in a highly refined carbon steel version of strength (8.8, 10.9) and a quality stainless steel A2) version of total resistance to corrosion and weather hazards.
The Anchor family of Sleeve anchor CH – a solution for any constructive application
One of the largest Advantages series The Gumbo CH It is the broad range of head and valves, which enable full-ethnic flexibility for both planning and promotions:
- CH-TO / CH-8.8: The most classic and popular version – screw with a niche head built to be fast and comfortable.
- CH-A2: The AISI 304) anchor for moisture, salts or industrial environments.
- CH-PL / CH-PI: Versions with a head of the outlet (bourg Cony Cantskin) that allow a flat installation “zero line” with the surface, without a prominent screw head.
- CH-INB / CH-INN: Inviolable security anchors, designed to prevent vandalism or a breach in public places.
- CH-GA / CH-GF / CH-AF: Anchors equipped with a steep (WJnet) or a ring (close or polished) to anchoring cables, chains and heavy locks.
- CH-ES: The threaded rod configuration is prominent with Um and Dia, ideal for heavy metal constomerates.
A performance table and a selected Technical data (concrete in 30 non-sid)
Below are partial data from the official technical specifications of the Jabmbo CH anchor, which show the recommended loads ($N_{rec)$ for the fire and USDV_{rec) and installation parameters:
| The degree of exclusion/intensive diameter | Numinitic drilling (h_1) | The compressed mansion for installation ($T_{inst) | pull-out load is recommended ($N_{rec) | The recommended load ($V_{rec) ($kN) |
|---|---|---|---|---|
| M6 ( ⁇ 8 or Ø9) | 45 mm | 10 Nm | 2.6 – 3.6 kN | 3.4 – 3.9 kN |
| M8 ( ⁇ 10 or Ø11) | 60 mm | 20 Nm | 4.7 – 6.6 kN | 6.0 kN |
| M10 ( ⁇ 12 or Ø14) | 70 mm | 35 Nm | 6.6 – 9.3 kN | 8.0 kN |
| M12 ( ⁇ 16) | 80 mm | 50 Nm | 8.1 – 11.4 kN | 9.8 kN |
| M16 (Open Ø20) | 110 mm | 140 Nm | 14.6 – 20.5 kN | 26.9 – 29.3 kN |
| M20 (NIS25) | 130 mm | 240 Nm | 14.3 – 20.0 kN | 34.4 kN |
Step by step: installing nylon plug Java ADIT CH in concrete
- The drilling: A hole in concrete was drilled by a hammer in accordance with the nominal drilling line ($d_0) and the drilling cheque ($_1) contained in the specifications. Thanks to the “Through-the-fixture” feature, you can drill directly through the hole of the fixed element.
- The cleaning of the fever: Clean the drilling dust from the hole through a covered snoring or a dedicated pump. A clean fever is essential for achieving maximum friction and preventing failure.
- The anchor room: Enter the Sleeve anchor anchor through the element set into the front in concrete, using a hammer if necessary, until the nylon plug snoring is well attached to the output/profile.
- The Handling from Man: Reduce the head of the screw or the UN using a suitable indicator key according to the $T_{inst value set in the table. The morning tightening will pull the cons and open the anchor sleeve perfectly and safely.
Common Questions About the Jabmbo anchor / nylon plug Sleeve anchor (FAQ)
More information, receiving personalized engineering advice or buying professional gambuoys, contacted sales and engineering representatives of the company Edith (ADIT) solutions to anchoring.