M-2000 PRO Pull-Out Tester

Portable on-site pull-out testing kit for small and medium loads — verify the holding capacity of stone-cladding dowels, undercut anchors, concrete screws, eye bolts and various anchors up to twenty-five kilonewtons.

Capacity up to 25 kNOn-site pull-out testingStone-cladding dowelsUndercut anchorsConcrete screws & eye boltsPortable kit with case

The Adit pull-out testing family

Choose the right tester for the load range and anchor type you need to verify on site.

Technical specification

Downloads

On-site pull-out testing: the practical guide

The M-2000 PRO is a portable pull-out tester used to confirm, directly on the construction site, that an installed anchor or fastener can carry the load it was designed for. It is built for small and medium loads and reaches a capacity of up to twenty-five kilonewtons, which covers the great majority of façade, cladding and light-to-medium fixing applications.

A pull-out test applies a controlled tensile force to the installed element and measures the load it withstands. This is the most direct way to verify real holding capacity in the actual base material, rather than relying on catalogue values alone. The kit is supplied complete in a carrying case, so it can be moved easily between test points and between sites.

What the M-2000 PRO tests

• Dowels for stone cladding and undercut anchors used in ventilated façades and stone claddings.
• Concrete screws installed in concrete and masonry.
• Eye bolts and a range of various anchors up to twenty-five kilonewtons.

Why field testing matters

The real performance of an anchor depends on the quality of the base material, the drilling, the cleaning of the hole and the installation itself. An on-site pull-out test with the M-2000 PRO gives engineers and inspectors an objective, documented result for the specific conditions of the project — an essential step for cladding, façade and safety-critical fixings.

Why choose Adit Ltd. for pull-out testing

• Engineering support: guidance on test setup, load targets and interpreting results for your anchor type.
• Field experience: agents with years of on-site experience across anchoring and fastening projects.
• Complete kit: the tester is supplied ready to use in a carrying case, with technical data and operating instructions available.
• Fast supply: available from the largest anchoring warehouse in Israel.

Frequently asked questions