MES
anchor stud anchoring from steel to David
Technical Specification
- Characteristics anchor stud anchoring from steel to David
- Material : carbon steel
- Load capacity Test from 14 to 15 tons (approximately to pull-out test) Wedge anchor to cracked and uncracked concreteed
Files to Download
Videos A Better Test on the Area
pull-out test anchored meS up to 14 tons
A rock anchor for ADIT MES – the powerful and safe rock anchor in the country
Every contractor and contractor who worked with unilateral patterns in ships I know this little Aboriginal called People’s Name. "Ball of Rock" and his engineering name internally threaded anchor spreads to fishes (Metal Expanding Shell) The anchor is screwed up to the humiliator, entered the hole drilling in concrete, and after the worker tightens it he is “opened” and hangs himself inside the concrete – so that the dyvegetide pulse from the outside side can be broken and connected to it in the later work.
The problem: most of The Rock Anchors Sold in market market market Without Technical Specification, it is official and without pull-out test.. The ADIT MES He is a notable exception in the field – this is anchored in fish pull-out test was documented on the ground, on a real estate in concrete in 40, and held pull-out load of the area. 14 tons. . . This is compared to generic rockcakes that in a similar area test only held about 5.4 tons – less than half of the load that the Bhuhan declared.
Why is it important: When talking about anchored rock To connect dibidity in the clandons, the difference between anchor and anchor can be 2.5 times more in actual suffering. The Adit Ltd MES anchor is The Best and Most Powerful Rock anchor tested in the Israeli Market With a true pull-out test documentation on the ground, not just a manufacturer’s statement.
What is a rock anchor and why it is used to connect a fisherman?
anchored rock It is a popular name for the steel encrypting female (Metal Expanding Shell) that is used for connecting Mut Dibbed (threaded rod full, DYWIDAG) to concrete when working with unilateral patterns For example, when you set up chronies, supporting walls or duphoon walls where the dyveget is not possible to connect the typhoid rod on both sides. The anchor is screwed on the edge of the dyscide, inserted into a drilling hole in concrete, and after the rigation "opens" mechanically and physically locks itself inside the concrete. This is how the external side of the typhage rod can be broken down at the end of the work, and the company is in its place in bars, other patterns or other elements.
The anchor of MeS (Metal Expanding Shell) of Adit is exactly an anchor of this type: a female anchor for phishing at diameter 15 mm, produced from carbon steel, with twisted wings and a guard strip that prevents the anchor from circling with the rod during the screw.
Genuine rock anchor compared to ADIT MES – what is the difference in actual suffering?
In most cases, importers and hockey The rock anchors. Proclamation of the load is permitted and loaded as a “on paper” – but this figure does not always reflect what is happening on the ground, on real concrete and in real installation conditions. In pull-out test, which was performed on the site for one of the largest contractors in the country. anchored a stolen rock In diameter 16 mm – which has been loaded with a possible load of 9 tons and a failure of about 14 tons – actually held. 5.4 tons.. . . In the same terms of examination, The ADIT MES held in practice. 14 tons 2.5 times more.
| Parameter | The anchor of a generic rock (not branded) | The ADIT MES |
|---|---|---|
| Abandoned suffering (producer) | Up to 9 tons is allowed / about 14 tons failure | — |
| You will suffer in pull-out test on the ground. | 5.4 tons | 14 tons |
| Technical Specification is official | In most cases. | See the technical Characteristics above. |
| pull-out test is documented | Usually not executed in practice. | It was performed and recorded (try, concrete in40) |
The practical conclusion: “A rock anchor” is not a single product – there are large gaps in suffering between doubt and supplier, and not every anchor presented as a “ anchor for phishing” is truly in the burdens that are being admired. Before purchasing a rock anchor, check the product source, demand real pull-out test data, and in many cases, make a designated pull-out test pull-out test on the work site.
Technical data - ADIT MES
| Parameter | given |
|---|---|
| Kind of anchor | The female anchor is spread to the metal expandinging Shell. |
| The suitable fish rod | 15 mm |
| Type of steel | Carbon Steel |
| You will suffer in an area test. | 14 tons in a boat with concrete in 40 |
| The drilling in concrete | 32–34 mm |
| embedment depth is recommended | 200 mm (150 mm) from Beyond Iron |
| The distance is recommended from the concrete | 150 mm (minimum) |
| Distance to installation recommended between anchors | 250 mm (minimum) |
Important: As with each rock anchor, the efficiencies depend on the depth of installation, the concrete type and the actual installation quality. Adit Ltd recommends it pull-out test is dedicated to the work site. To get the exact efficiency to the specific project conditions, and not to be satisfied with a general laboratory.
installation guide - ADIT MES anchor
Proper installation is the crucial factor in actual suffering of anchored rock - A considerable portion of the cases in which an anchor "does not hold" as necessary stem from a wrong installation and not a defect in the product itself. The following installation stages should be taken precisely:
- Deeply drill and exact diameter indicated in detail (32–34 mm, 200 mm)
- Clean the drill well before the anchor screw
- Make sure the wings and the guard are directed at each other.
- Avoid a rotation of the anchor during the final rod
- Keep minimal distances from the concrete and between anchors
- Do pull-out test on the site when you are critically tolerated to project
- Choose a MeS anchor and not anchor a rock without test data
- Allow the anchor to rotate together with the dysyntheidic cord during the screw
- Install a small drilling depth from the recommended (200 mm)
- Forgetting dust cleaning the hole.
- Install a small distance from 150 mm from the concrete
- Let’s assume that every “rock anchor” in the market holds the same suffering.
- To rely on a determined suffering without pull-out test on sensitive site
- Use a damaged, distorted anchor or with wings that do not open a part
Common Apps for the ADIT MES Rock
⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇ ⁇
The classic use: a multi-layered connection to a single-sided format in the boat, when the other side of the concrete is not possible.
Supporting walls and duphoon walls
Connecting templates to supporting walls and diphones when you are required to break the phibian rod at the end of the work.
Fundamental foundations and infrastructure buildings
anchoring points temporarily for templates and infrastructure structures that require a convenient dismantling of the Difty Mutants after the concrete difficulties.
The regulations that require high suffering
projects in which a high and proven beauty is required – and not only a manufacturer’s statement – such as depending on and heavy temporary fibres.
⁇ An Engineering Note: In any case where the dybidity can be connected either side (by-sided format) or when the rod is not necessary – it is also worth checking out an alternative of the rod. Chemical anchoringProvides a higher and more consistent suffering and regardless of the material installation of the anchor. In any doubt, the right choice for project should be addressed to the engineer of Adit Ltd: 054-7976110.
Common Questions About a Rock anchor and anchor for the fish
anchored rock It is the popular name, common in Israeli construction sites, to the spread female steel anchor (Metal Expanding Shell) used to connect the phibian pod to concrete in unilateral patterns. The exact engineering name is internally threaded anchor for fish Or “a anchor spreads.” The anchor spreads mechanically inside the drilling hole and hangs itself in concrete, allowing the outer side of the dysbyd fish rod at the end of the work.
The rock anchor (for me): Enter the drilling hole, spread and poison itself mechanically. Advantage: The dybigide mutation can be broken at the end of the work. The buffer: a suffer depends very much on the quality of installation, and there are large gaps between different suppliers.
Chemical anchoring: A rod is glued to a hole with the help of a severe/chemical adhesive. Usually provides a higher and more consistent suffering, but usually does not allow for a comfortable breakup of the rod. The choice depends on the specific need for project – the liquidation of the mutation against maximum suffering.
ADIT MES was tested in pull-out test on the ground, on a real estate in concrete in 40, and held in the area. 14 tons. . . This is a documented and not only a manufacturer’s statement. However, actual efficiency also depends on the depth of installation, the type of concrete and the quality of installation in any given project – therefore it is recommended to carry out a designated pull-out test pull-out test on the site when you are experiencing critical suffering.
Unlike Chemical anchors and mechanical anchors are standard certified (such as ETA), There is no single Technical Specification in Israel and requires rock defenders.. . . Any importer can declare a possible load and load as a result of its own, and not always a true pull-out test is made to ensure the figure. This is how one anchor may last 14 tons and a similar anchor in the mirror will last only 5–6 tons. The recommendation: choose an anchor with real test documentation on the ground, and not rely only on a product page.
anchored in fish He is every accessories connected by a full threaded rod to concrete. In congestions with unilateral patterns, it is impossible to access the inner side of the concrete to tighten or output—and therefore connect a female anchor (such as a rock anchor) to the inner end of the tycodied rod, which is circulating itself in concrete and enables a convenient dissolution of the external side at the end of the work.
ADIT MES (Lifty 15 mm) requires a drilling hole in the diameter 32–34 mm A recommended depth of 200 mm (about 150 mm beyond the depth of iron). The hole should be cleaned well, a drilling struggle in air pressure before the anchor screw.
The minimum distance recommended from the concrete is 150 mmThe minimum distance recommended between two nearby anchors is 250 mm. . . Intravention on these distances may damage the concrete ability to “take” the anchor when it spreads, causing local sadead and low-sensitivities from the observer.
The most common mistake is Allow the anchor to turn around with the dysynthed During the final screw, which prevents the wings from fully grasping and significantly harms suffering. The anchor must be held or prevented (for example, using a second or butterfly key) during the rod, and make sure that wings are completely open before relying on the anchor.
In many cases - Yes, very recommended.And some of the details are required. Since there is no binding standard and a uniform specification for rock defenders, and since actual suffering depends very much on the quality of installation and type of concrete specific on the site, pull-out test is the only sure way to confirm that the anchor holds the load required before it is based on engineering.
ADIT MES anchors fit the Davifish humiliator in the diameter 15 mm One of the most common rows in unilateral patterns in all congestions and walls supports Israel.
The MES anchor was tested and documented in concrete in 40, but it was also used in other strength concrete. However,, strength concrete directly affects actual suffering In concrete, the suffering will be lower than the recorded dose. In any case of concrete in strength is lower than B40, or when you are critical to design, you should make pull-out test on the site or consult with Adit.
On his face, the rock anchor itself is cheaper (low material cost), but when you calculate the value of the rock itself cheaper (low material), but when you calculate the level of the ground. Total cost - including drill bit is wider and more expensive to drill deep, longer work time, and pull-out test increases are recommended - the total cost to anchoring is approaching and sometimes even exceeds Chemical anchoring cost that provides a much faster and faster and faster increase. A detailed economic comparison between the two methods appears in the Adit article.
While most of the rockcakes in the market are sold without pull-out test are recorded. ADIT MES anchor is actually tested on a real site And holding 14 tons in concrete in 40 – a significantly higher than a generic rock anchor tested in the same conditions and held only 5.4 tons. The combination of full Technical Specification, quality carbon steel, the resilience strip to prevent rotation, and real test documentation makes it the safest and most proven choice in the Israel Rock Anchor category.