Technical Specification
- Characteristics A link to work at height and glyca
- Material : Carbon steel with Zinc Plating
- Standards : EN 959:2007; EN 795:2012-A
What is anchoring ADIT AAC and why is it essential for your safety?
In modern construction and industry, the subject of anchoring to work at height It is critical and there is no place for compromise. ADIT AAC She is The tongue anchoring (Anchor Plate) Professional From the anchoring Permanent and stable for full protection from a downside down, approved for the use of one person.
The lingual is manufactured from steel from a quality and standing collateral, and is fully complying with the strict European standards. EN 795:2012 Type A. . . It is used as the most reliable endpoint to which employees are connected at height, the snail surfers and systems in different fall-outs in building sites, factories and infrastructure facilities.
The perfect anchoring solution in concrete
To ensure safe and full functioning of From the anchoring This is a must combine it with a happy and adapted mechanical means for the type of infrastructure. ADIT AAC is designed for optimal work in two key combinations:
1. 1. Combining with a mechanical Wedge anchor ADIT MTH
The ADIT MTH Arrow anchor is an anchor for the first-line mechanical expansion, particularly suitable for regular applications in non-Cracked concrete. The combination of the MTH linguistics provides a quick, classical, strong and economic solution especially to creating reliable endpoints.
2. Combining with professional concrete screw ADIT TFE
The concrete TFE screw allows direct fastening and cleans into the concrete without creating half internal expansion in the material. Its great balance is quickly installation, the ability to work safely close to the concrete team and small distances between anchors, alongside the possibility of depletion or simple periodic examination.
Compared to ADIT AAC
| comparison. | A combination of Wedge anchor ADIT MTH | A combination of concrete screw ADIT TFE |
|---|---|---|
| anchoring in concrete | The spread of controlled friction from the mansion | Directly cut in concrete without expansion |
| Speed and ease of installation | Standard (the room, suffocation and precision from the mansion) | Especially fast (direct fastening in Impett) |
| Work distances from team | Limited due to the spread. | Minimum (the most suitable for work close to the end) |
| The possibility of dismantling/examine | Permanent (cuting the rod in the case of evacuation) | You can easily run out and replace easily. |
Characteristics is a major technical analysis of ADIT AAC
anchoring's Adit tab offers a series of clear engineering Advantages that makes it the market's top choice:
- Full international standard: The approval is a certified SATRA laboratory under the EN 795:2012 Type A.
- resistance is extreme environmental: It is suitable for working in a particularly broad range of temperatures between $40 and circumcision C-$80 mph/circum] and C+.
- Unlimited life expectancy: The product is designed for long-standing work, subject to periodic checks as a law.
- Extended Manufacturer Responsibility: 3 years of full responsibility for Adit Ltd against any flaw in the material or production.
The correct installation of the anchoring ADIT AAC
- The drilling: Cods in concrete hole in the diameter and the corresponding depth for the selected anchor (MTH or concrete screw TFE) depending on the manufacturer’s instructions.
- strict cold cleaning: Clean the drilling hole completely in struggle and dispersal through a dedicated snoring and brush (a critical phase for ensuring the anchor will suffer).
- The turtle and the room: Putting the sThe tongue Above the drilled hole and set the mechanical anchor through its designated anchoring opening.
- The final hand: The anchor is well-enclosed: the MTH anchor uses the precise Mars key; in screw TFE is decorated to a complete and complete clutch of the anchoring surface to concrete.
Common Questions about anchoring tab, anchoring surfaces and anchoring to work at height (FAQ)
What is the anchoring tab and what is its role?
The tongue anchoring is a hard-end accessories made of strong metal, installed on the structure infrastructure (concrete or steel) and creates a strong metallic edge, installed on the structure (concrete or steel) From the anchoring Convinced with a ring or a rounded door. Its central role is to enable a safe, quick and legal connection of a linkage (such as contact rings, tyrants and security cables) for systems. anchoring to work at heightIn a fall loop or work placement systems.
What is EN 795:2012 Type A and why is it mandatory for anchoring for safety?
The EN 795 Type A standard is the European standard that defines engineering requirements, test methods and loading for fixed docking points connected to the building. The approved product under this standard ensures that it is able to carry the vast forces of the universe created during human fall, and constitutes a legal and safety threshold for any system. anchoring Safety In the country and around the world.
Can I use ADIT AAC for anchoring for browsing?
Definitely yes. Thanks to the high mechanical resistance, approval SATRA and full verification for the EN 795, the lingual is used as a great success as a point of view. anchoring for surfing Work in the cables (Rope Access) on the shell of buildings. However, it is necessary to remember that the linguistic is happy and intended for the use of only one person at any given moment.
Which anchor is better to combine with the linguality – Wedge anchor MTH or concrete screw TFE?
The choice depends directly on the nature of project and the location of the installation. If a very quick or relatively close installation is required for the concrete team (as in a snail or a concrete wall corner), it is recommended to use concrete screw. ADIT TFE It does not produce half the spread of the concrete around it. For classic and permanent applications in the center of massive concrete surfaces, Wedge anchor ADIT MTH It is a great, standard and economic solution.
What are the maintenance and testing requirements for anchoring to work at height?
According to the law and manufacturer’s instructions, every system anchoring to work at height And fixed docking points must be tested at least once in 12 months by “a qualified embedded check for anchoring systems.” The test includes a visual examination, a mantra/subjective test if necessary and official documentation of the site’s equipment diary.
Can I use ADIT AAC as a means of loading or equipment?
No way and no! The product is designed, tested and only as anchoring, and is happy to protect a person from a downside downfall. It is strictly prohibited to use it to stream cargo, connectors, or activate dynamic loads that are not related to the safety and high work of employees.